Joined in 2023 
82 
63 About this deal
Making use of a 1,500 Watt motor, this little devil has a decent no-load speed at the blade of 5,000 rpm. It’s the best budget table saw for DIYers on a budget, who still want to achieve good results. Weighing in at a respectable 22.2 kg, it’s not the lightest table saw on my list. It’s still very portable though, and the 250 mm blade puts out an impressive 5,000 rpm no-load speed. What really impressed me about this table saw is the cut depth. 80 mm at 90 degrees and an impressive 65 mm at 45. The blade height and angle are controlled with a dual-purpose handle that is made from hard plastic. Since you could often be working with large pieces of material, you’re more than likely to be using both hands. What if you need to hit the power-off button in a hurry? The table saw switch needs to be as large as possible. And with the possibility of no hands-free, you’ll need to engage your knee, so the switch should be as close to knee height as possible. If you’re working with a table saw that sits on a bench, then the knee might not work so your elbow would be the next best (the switch would be higher anyway). In this next section, we’ll discuss the most common safety features that are built into or come with the table saw. Then we’ll consider the common sense things you should be thinking about as the operator of this potentially dangerous piece of equipment. If your table saw does not come with the following features maybe you should look for another one that does. On-Off Switches that Keep You Safe
Design-wise, this is a quality but no-frills setup. The saw comes in a silver metal and plastic case, with a small table size and no dust extraction hoses in place. You get three different blades for cutting a range of materials, and a clear plastic guard for safety. The cutting height and angle can be easily adjusted with the hand wheel and calibrated gauge. You can cut down to 83 mm with the blade in a vertical position and 58 mm if tilted to 45 degrees. Complex projects are no problem for this table saw either. It can accommodate common compound cuts with its 60-degree mitre cut and 45-degree bevel cut capacity. The best benchtop table saws are light and portable and ideal for DIYers, whilst the best contractor table saws have larger motors and sturdy stands. Cabinet table saws are the ultimate workshop table saw for professionals. Hybrid table saws are a ‘cut-down’ version of the cabinet saw with similar features. They too are stationary table saws but smaller, lighter, less powerful, and less costly.
Conclusion
For the money, I was surprised that it has such a large table size. At 1094 x 487, it has a larger workspace compared with the more expensive ParkerBrand PTS-250. The extending side tables are easy to fit and give you a flexible footprint when space is at a premium. Both the Bosch 4100-09 and the Dewalt DW745 feature a 15amp motor, which means that power shouldn’t be a big issue with either of these models. The Dewalt’s table saw sports a high-torque motor which can efficiently deliver a no-load sped of 3,850 rpm. The Bosch saw, on the other hand, can provide a no-load speed of 3,650 rpm. To minimise the prospect of escaping dust, the blade is enclosed in a metal housing that also includes a chip extractor port at the rear of the saw.
A table saw extension comes in very useful when you want to work with and support material significantly larger than the original table size. Some table saw extension tables are standalone and need to be attached to the main saw table via supports before use, whilst others come already attached to the table via a hinge or telescoping mechanism. Safety Features to Look For The powerful 1,600 Watt motor can create a no-load speed of 5,500 rpm. It also has a soft start, from a large well-positioned on-off switch, and runs with overload protection. Its 8″ blade can cut to a depth of 70 mm when set at 90 degrees and 50 mm when set at 45 degrees. And finally, if the on-off button is recessed behind a protective flap that mechanism protects the button from being accidentally pressed. Blade Guards Keep Your Hands Away from Danger On cabinet table saws the problem is relatively easily solved since dust collection takes place within the cabinet itself and the dust falls onto a slanting shelf that funnels it into a dust extraction port (usually 4″ diameter) to which a hose is attached. You then just apply suction from a vacuum.Contractor table saws and benchtop table saws however are obviously not designed in that way. Even though most of their debris will also be diverted into dust collection ports (usually 2½” diameter) onto which you attach a vacuum hose, more sawdust will collect naturally due to the more ‘open’ design of the portable table saw (and fall from the base of the table saw to the ground). So further vacuuming will be required to keep your work area pristine. Table Extensions for Working with Larger Materials Solid parallel and cross stops help to secure the workpiece in place. If you’re performing cross-cuts the cross stop contains an angle scale of +/- 60 degrees to ensure accuracy. A dual-purpose handle controls both the height and angle of the blade. The blade guard is also transparent to provide greater visibility when cutting. The table saw can cut to a depth of 85 mm when positioned at 90 degrees and 65 mm when angled at 45 degrees. The top is supported by a sturdy frame with rubber feet. The 563 mm x 583 mm tabletop can be extended both to the left and to the right by another 165 mm to accommodate larger work pieces. Most table saws come with a generic table saw blade designed to work to that saw’s specification. That may sound obvious but there are so many variations of table saw blades that if you ever wanted to replace one you need to be very sure you choose the correct type. A mistake could not only spoil your workpiece but also cause you serious injury. For example, both table saw and blade are designed to work to a maximum operating speed (rpm). If the former exceeds the latter the centrifugal force created by the mismatch will destroy the saw blade. These days, the best table saws come with a magnetic switch. This is a great idea because in the event of a power cut the magnet automatically stops the table saw from starting up when power is restored from the mains supply.
This is a more affordable, lighter, and more compact version of the top-of-the-range Bosch GTS 635-216 table saw featured above. The AdvancedTableCut 52 weighs just 8.5 kg, less than half the amount of the GTS10J. The table saw (aka bench saw, saw bench, saw table or even table saw bench) is an extremely powerful and versatile cutting machine. Most table saws work by using a circular saw blade, driven by a motor, and mounted on an arbor secured with trunnions, protruding through a slot in the saw table top. Types of Table Saw Cabinet table saws are the best-engineered, largest, heaviest, most powerful, and most accurate of table saws. These are stationary table saws. They consist of a cast-iron tabletop, most likely with table extensions to each side. The table saw itself sits on top of a heavy cabinet that encloses a belt-driven motor. The cabinet protects the motor and stops dust from escaping. This would be the table saw of choice for a professional workshop and costs many hundreds of pounds. Hybrid Table Saws Credit subject to status and affordability. Terms and conditions apply. Axminster Tool Centre Ltd trading as Axminster Tools is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348.Depth of cut is 85 mm with the blade in a vertical position and 65 mm when tilted to 45 degrees. Compound cuts are also no problem for the Evolution Fury. The mitre gauge angle extends to 60 degrees on either side of the vertical and the angle for bevel cuts tilts to 45 degrees. Introducing the simple but sturdy Tooltronix PTL-91 table saw. Standing tall on a sturdy frame, you’ll be surprised at the power you can get from its 1,800 Watt motor. A large carry handle is built into the machine for easy transport and there is a useful built-in drawer for storing saw blades and other accessories. But even though the German model is more cumbersome, it’s easier to move around and set up thanks to its robust rubber wheels and the unique Gravity-Rise Stand. Moving the Dewalt DW745 is effortless, but it’s important to note that it has no wheels and is assembled separately. The Gravity-Rise Stand of the Bosch saw can be raised into a working position with just one, fluid movement.
The large on-off button is easy to operate, and the powerful 1,800 Watt motor can generate a no-load speed of 5,000 rpm. The motor features a soft start with built-in overload protection. The mitre gauge is easy to secure in position and can accommodate cross-cuts between +/- 60 degrees. The hand wheel that controls the blade rise, fall and tilt also works smoothly. The motor, rated at 2,000 Watts, is more powerful than all its competitors. It can generate an impressive no-load speed of 5,000 rpm that’s more than adequate for most jobs. In terms of safety features, the blade guard and riving knife are well-constructed and connect to the dust extraction port. Apart from operating speed, the next thing you need to consider is the blade size – specifically its diameter, width, and hole size – to ensure compatibility with the table saw. The most popular blade size is 250mm, equating to a maximum cutting depth of about 80mm . Apart from the table, the most important feature of the table saw is the saw blade itself. For vertical cuts, the table saw has a handle to raise or lower the saw blade. For angled (bevelled) cuts another handle can tilt the table saw blade up to 45 degrees to the left or right. A throat plate surrounds the saw blade to ensure dust does not fall past the blade’s edge through the slot in the tabletop to the arbor or driveshaft (if direct drive motor). A blade guard – ideally made of clear plexiglass – hinges to the saw table to protect the user from the table saw blade. The GTS 635-216 Professional is the compact, yet powerful, table saw for multi-purpose use. Its 1,600 W motor power is ideal for a cutting height up to 70 mm and for a rip capacity up to 635 mm. The low weight of only 22 kg, its ergonomic handles, and protective on-board storage make transport genuinely easy and safe. The table saw works extremely precisely and, due to its integrated slide carriage, table-widener, and table extension, it is exceptionally versatile. Equipment & ApplicationThe aluminium fence clamps into place at one end parallel to the blade to ensure accurate rip cuts. The mitre gauge fits snugly into its slot on the table for accurate cross-cut work as well. The difference between these two isn’t noticeable without specialized equipment and therefore can’t affect the performance. But the noticeable difference is the fact that the 4100-09 comes with a so-called soft start motor – there’s no such thing on the Dewalt’s model. This could cause a remarkable load on the user’s power source and could affect other tools that are attached to the same source. Also with portable table saws, the saw blade is usually positioned towards the front of the table so there is less room to manoeuvre a mitre gauge for example. Rip fences are usually made to fit the table according to the manufacturer’s specific design so you can’t replace them with more generic aftermarket versions. Correct Table Saw Blade Selection
Great Deal 
New Comment