Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Mapei Kerapoxy Epoxy Tile Grout allows you to create floors, walls and worktops, etc. in compliance with the HACCP system and the requirements of EC Regulation No. 852/2004 regarding hygiene and foodstuffs. Grouting of floor tile finishes in the foodstuffs industry (dairies, cheese factories, abattoirs, breweries, wineries, preserves factories, etc.), shops and environments where a high level of hygiene is required (ice-cream parlours, butchers shops, fishmongers, etc.). Mapei Ultracolor Plus is available in 2kg and 5kg bags, in the following colours: Please note, only some colours are available in 2kg bags.

Due to insurance and health and safety regulations we are unable to transport goods into a Customer’s property For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity.

Guides & Advice

Remove excess grout: with a dry sponge, wipe away any excess grout to make sure all the gaps are completely filled. Make sure you don’t scrub hard with the sponge though, as this could pull grout out of the grooves.

From interior walls and floors to swimming pools, pathways, patios and even commercial areas, grout can be the thing that keeps your tiles looking better for longer. With DropEffect technology, and anti-mould properties thanks to state-of-the-art biotech technology, Mapei grout is suitable for tiling most areas of the home and beyond - including those that experience high volumes of foot traffic on a daily basis.

Delivery & Returns

Of course, with our Mapei grouts you aren’t limited to neutral hues, you can also use colourful shades in creative ways to make your tiles really pop out. From cool space blue and dreamy turquoise to sunny yellow and violet, embrace the beauty of bold grout colours to your heart’s content. If hardened and Kerapoxy CQ has to be removed from the joints, use an industrial hot air blower. If hardened localized residues of the product remain bonded to the tiles, use Pulicol 2000 for cleaning. Apply the grout: load grout mixture onto your grout float and generously apply it to the gaps between the tiles. Using diagonal and firm strokes across the tile joints, make sure you press the grout fully into the grooves so it’s filled to the top and evenly distributed. To ensure complete coverage, we’d suggest applying grout to small areas, working your way logically along.

Speaking of grout colours, you’ll find our Mapei grouts come in a vibrant array of colours, helping you to find an option that suits your tiling project. Whether you want to colour match or contrast your tile grout against your chosen tiles, you’ll be spoilt for choice. After laying any tiles, you’ll need to choose the right tile grout to help you complete the job and seal your tiles from dirt and moisture - and this is where we can help, too. Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh. AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO , SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ.Tiles Direct is your one-stop tiling shop, which means we won’t just help you find the perfect tile for your interior design project - we also have a raft of additional tiling accessories, including Mapei tile grout, to ensure you get a professional and long-lasting finish. This means, when choosing the best grout for your tiling project, you’ll need to consider the specific needs of the job. For example, interior decoration projects where you’re concerned with aesthetics alone will likely lead you to choose a different option than that of practical outdoor tile installations. If you are installing one of our hard-wearing outdoor tiles, you'll need a grout that’s fully equipped to handle exposure to increased moisture and dirt, as well as extreme temperature fluctuations between the seasons. UniBond Ultra Force: these ready-mixed grouts make use of fibre technology for maximum durability, with top protection against moisture and mould to keep your grout looking its best for longer. Colour options include grey and navy blue, infused with glitter to bring sparkle to walls or floors tiled in porcelain, ceramic or natural stone The quantities are already in the correct proportions, therefore mistakes should not be made. Do not guess the quantities when mixing the two components. A wrong catalysis ratio could impair the hardening process. For flexible expansion joints or joints subject to movement use an elastic sealant from the Mapei line (e.g. Mapesil AC, Mapesil LM, Mapeflex PU45 FT or Mapeflex PU21).