EASYJOINT Paving COMP Black 12.5K

Product Information

Both the bedding and sub-base must be permeable. When using a mortar bedding mix, this should be no stronger than 6:1 (sharp sand: cement). Be careful when using add-mixtures such as SBR or PVA as these can seriously affect the permeability of a mortar mix.

Clean out the old jointing product completely to create the correct joint size (see information under the ‘Joints’ section). Do not use EASYJoint if the correct and fully clean joint size cannot be obtained. The wide widths are not a problem and can be 5″ or more; however, when you have really wide joints you also need to have a little more depth, so it doesn’t break up when it is stepped on. Freezing conditions are not always problematic for EASYJoint, however the volume of water used during the application process can potentially freeze. In this instance the particles within the grout mix won’t settle into the joints evenly due to the presence of ice and potentially lead to longer term problems. Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? Years of research and continuous development of our jointing compound makes this a market leader. Hundreds of thousands of EASYJoint tubs sold globally.No more worrying about a thunderstorm coming up and compromising your finished product. Easy Joint can be installed in the rain! It can be used on natural stone and pavers with a minimum depth of 1” and minimum joint width of 1/8”. An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled that will last for years. A strong joint that will resist the elements and stand the test of time – better than traditional jointing methods

Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. If sealer is applied after the patio has been laid, do not apply any type of sealer over the joint for at least a month after it has set hard. Only use a breathable sealer, otherwise EASY Joint may or may not remain permeable, and you may seal in any natural efflorescence passing through the stone. These natural salts will disperse over time. Can you apply EASYJoint in freezing conditions? Subject to the other provisions of these conditions, Building & DIY Supplies shall not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, pure economic loss, loss of profits, loss of business, depletion of goodwill and similar loss), costs, damages, charges or expenses caused directly or indirectly by any delay in the delivery of the Goods.